Carco Vee-Packs


Carcotex UN

  1. Available endless or plit.
  2. Male ring, material: Rubber.
  3. V-Ring, material: Rubber fabric.
  4. Female, materianl: Rubber fabric with kevlar or PTFE or Nylon.
Rubber Material Temperature Max. Speed Max. Pressure
NBR - 40° +120°C 3 m/s 350 bar
HNBR - 40 +170°C 3 m/s 350 bar
FKM ( Viton ) - 30° +200°C 3 m/s 350 bar
  • Supplied with calibrated stack height suitable for fitting as piston seal or rod seal.

Carcotex SG

  1. Available endless or split.
  2. Male ring, material: Rubber.
  3. V-Ring, Material: Rubber fabric.
  4. Female, Material: Rubber fabric with Kevlar or PTFE or Nylon.
Rubber Material Temperature Max. Speed Max. Pressure
NBR - 40° +120°C 3 m/s 350 bar
HNBR - 40 +170°C 3 m/s 350 bar
FKM ( Viton ) - 30° +200°C 3 m/s 350 bar
  • SG is floating into the housing and doesn't require initial compression nor periodical. Adjustments thanks to the top terminal ring interference.

Carcotex UG

  1. Available endless.
  2. Male ring, material: Rubber.
  3. Female, material: Rubber fabric or PTFE or Nylon.
Rubber Material Temperature Max. Speed Max. Pressure
NBR - 40° +120°C 3 m/s 350 bar
HNBR - 40 +170°C 3 m/s 350 bar
FKM ( Viton ) - 30° +200°C 3 m/s 350 bar
  • UG is floating into the housing allowing large axial tolerances.
  • "Carcoflon"  treatment gives a considerable reduction of dry friction coeffecient between rubber and metal.

Carcotex SP

  1. Available endless or split
  2. Male ring, material: Rubber
  3. V-Ring, material: Rubber fabric
  4. Female, material: Rubber fabric with kevlar or PTFE or Nylon.
Rubber Material Temperature Max. Speed Max. Pressure
NBR - 40° +120°C 3 m/s 630 bar
HNBR - 40 +170°C 3 m/s 630 bar
FKM ( Viton ) - 30° +200°C 3 m/s 630 bar
  • Anti-extrusion female adapter with Kevlar extra reinforcement
  • fitted with preload
  • suitable for adjustable housing
  • usually split design, ready for fitting.

Carcotex SP/SG

  1. Available endless or split.
  2. Male ring, material: Rubber.
  3. V-Ring, material: Rubber fabric.
  4. Female, material: Rubber fabric with Kevlar or PTFE or Nylon.
Rubber Material Temperature Max. Speed Max. Pressure
NBR - 40° +120°C 3 m/s 630 bar
HNBR - 40 +170°C 3 m/s 630 bar
FKM ( Viton ) - 30° +200°C 3 m/s 630 bar
  • special male adapter for immediate response even at very low pressure
  • no-leakage performance in case of worn rams and big misalignment
  • fitting without preload
  • usually split design, ready for fitting.